NeiX RJ45 CAT6 EZ UTP Pass-Through Connectors – Pack of 100
100 connectors. Zero guesswork. NeiX EZ CAT6 UTP RJ45 connectors are designed for Pass-Through technology — the wires pass fully through before crimping for perfect visual verification. Lightweight plastic body for unshielded UTP cables. The part that completes your NeiX Pass-Through crimping tool on indoor job sites.
| 100 Pieces / pack |
CAT6 Category |
UTP Unshielded |
EZ Pass-Through |
8P8C Contacts |
✔ Pass-Through (wires pass through) | ✔ UTP plastic body | ✔ 8 gold-plated contacts | ✔ Compatible with NeiX NX608228 crimping tool | ✔ Local SXM stock
- Description
Description
The lightweight version. The same level of requirement.
For indoor installations on unshielded cable, no need to pay for shielding you don’t need. The NeiX EZ UTP Pass-Through connector offers exactly the same full pass-through technology as its FTP counterpart — the wires come out entirely, you check the color order before crimping, zero wasted connectors — in a lightweight plastic body that’s easier to handle and suited to standard CAT6 UTP cables. Ideal for indoor network cabling in villas, offices and shops.
Anatomy of the NeiX EZ UTP Connector
UTP Plastic Body
Lightweight body suited to unshielded UTP cables. Easier to handle on high-volume indoor job sites.
Pass-Through Channel
All 8 wires pass fully through and come out the other side — visual color verification before crimping.
8 Gold-Plated Contacts
Gold-plated contacts for optimal resistance to oxidation in humid tropical environments.
Visual Check Before Crimping
The wires come out entirely from the connector. Check the T568A or T568B order with the naked eye. If a color is misplaced, pull the wires out and start again — without wasting a single connector.
Ideal for Indoor Cabling
Indoors, away from sources of electrical interference (motors, inverters, high-voltage cables), an unshielded UTP cable is the standard and perfectly suited solution. Lightweight plastic body, fast crimping, unit cost optimized for high volumes.
?️ Gold Contacts Anti-Oxidation
In the Caribbean, humidity and airborne salt attack unprotected contacts. Gold plating resists oxidation and maintains perfect conductivity over the long term — even in outdoor installations near the sea.
Pack of 100 — Job-Site Format
100 connectors per pack to cover a complete job site without running out. For an installation of 30 network outlets with a 10% margin of error, one pack is more than enough. Buy in quantity, save on unit price.
⚠️ Important — UTP or FTP: choosing the right connector
This connector is designed for unshielded UTP cables. If you use a shielded FTP cable (like the outdoor NeiX CAT6 FTP), you must use our RJ45 CAT6 EZ FTP connectors to ensure shielding continuity. Using a UTP connector on an FTP cable breaks the protection chain and cancels out the benefit of the shielding.
Technical specifications
| Brand | NeiX |
| Type | RJ45 EZ Pass-Through |
| Cable category | CAT6 |
| Shielding | UTP — Unshielded (plastic body) |
| Contacts | 8P8C — Gold-plated (anti-oxidation) |
| Technology | Pass-Through (wires pass through for visual check) |
| Compatible cables | CAT6 UTP unshielded cables only |
| Required crimping tool | Pass-Through crimping tool only (e.g. NeiX NX608228) |
| Quantity per pack | 100 pieces |
| Availability | Local stock — Saint-Martin (SXM) |
Supported wiring schemes
T568A
1 — White/Green
2 — Green
3 — White/Orange
4 — Blue
5 — White/Blue
6 — Orange
7 — White/Brown
8 — Brown
T568B (the most common)
1 — White/Orange
2 — Orange
3 — White/Green
4 — Blue
5 — White/Blue
6 — Green
7 — White/Brown
8 — Brown
IP camera cabling
Wi-Fi access points
Professional network cabling
Villa network outlets
Patch panel rack
The Perfect NeiX Cabling Trio
These connectors are designed to work with our CAT6 UTP network cable of your choice (0.56mm CCA conductors, perfectly compatible) and our NeiX NX608228 Pass-Through crimping tool. All three products are developed by NeiX to work together — one supplier, one order, available from local stock in Saint-Martin.
The Nexus Carib verdict
« The rule is simple: UTP cable → UTP connector. FTP cable → FTP connector. The classic mistake is using a UTP connector on a shielded cable to save a few cents — and ending up with a system that picks up interference at the connector while the cable itself is perfectly shielded. These UTP connectors are the right part for the right job: indoor network cabling, clean, fast and efficient. With 100 pieces in the pack, a 30-outlet job site is covered with margin to spare. »
— The Nexus Carib team
